0 of 18 Questions completed
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 18 Questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
True or False: It is recommended that you check engine fluids prior to environmental processing.
True or False: Additional information for the removal of mercury switches can be found on the ARA web-site.
True or False: Mercury switches are commonly located under the hood, in the truck, in the glovebox, and in ABS systems.
True or False: Only an “approved person” as defined in the ODS regulation can perform the recovery of refrigerants.
True or False: The use of electrical drills is considered a safe alternative to pneumatic drills for the extraction of fluids from vehicles.
True or False: Secondary containment is defined as any area designated for the storage of hazardous wastes.
True or False: Be sure to confirm the battery has been removed or disconnected for a maximum of 5 minutes before removing air bags.
True or False: You should position yourself directly in front of the airbag during removal.
True or False: It is recommended that you always cut wires at the base when removing electrical control modules.
True or False: Any unwanted body parts removed should be safely stored in the vehicle.
True or False: Always have catchment containers ready as you remove parts that may contain residual fluids.
True or False: When disconnecting the drive shaft universal bolts should always be placed back so you don’t lose them.
True or False: When removing an engine with a hoist you should avoid abrupt, shaking, and jerking motions.
True or False: Emergency brake cables should be cut before rear axle disassembly.
True or False: A coil spring clamp must be used to relieve pressure of the rear suspension during disassembly.
True or False: All small parts that cannot be written should be placed back in the vehicle.
True or False: Door or quarter panels should be wrapped in bubble wrap before shipping.
True or False: When sectioning a vehicle it is important to secure the vehicle due to changes in weight due to removal of the part.