Preamble

Approximate time to complete this lesson: 10 minutes.

Lesson 2.3 Video

To begin Lesson 2.3, watch this video (2 minutes, 14 seconds)

Review of Lesson 2.3

Procedures:

1. Move the front seats as far forward as possible & remove rear bolts.
2. Move front seat all the way back and remove front bolts.
3. Tip seat to undo any wire harness.
4. Rear seats can be unbolted and removed in the same manner.
5. Unbolt center consoles if required.
6. Remove kick panels and scuff plates.
7. Floor shifter should be disconnected and removed.
8. Fold carpet front to back and remove through back door.

Quality Control:

1. Some year, makes and models come with seat airbags.
2. Power seats should be loose.
3. Do not cut the carpeting. Check with your supervisor.
4. Basic tools required.

Health & Safety:

1. Standard PPE applies.

The next lesson (topic) is Control Modules / Dash Board